Avaya S8300 - Manual (Page 403)

Terminal server installation
Issue 9.1 June 2006 403
To connect the IOLAN+
1. Connect the DB9 end of the DB9-to-DB25 cable to the COM port on the PC or laptop.
2. Connect the DB25 end to the null modem adapter.
3. Connect the other end of the null modem adapter to the DB25 to RJ45 cable.
4. Connect the RJ45 end to Port 1 of the IOLAN+.
Before beginning the initial administration, make sure you have the following information:
● New IP address and subnet mask for IOLAN+
● Host name for IOLAN+
● IP address of S8300 Media Server Ethernet interface
● Port number of S8300 Media Server Ethernet interface where adjunct connects
Use the HyperTerminal software program that comes with Windows 95/98/NT/2000 to
administer the IOLAN+.
To set up HyperTerminal on the computer
1. Open HyperTerminal.
2. Click on File > Properties > Connect tab.
In the Connect using: field, select COM n
where n is the communication port your computer is using.
3. Click on CONFIGURE
Set the bits per second field to 9600.
Set the Flow control field to Hardware.
4. Click OK.
5. Press ENTER to get the login prompt.