Avaya S8300 User Manual
Page 486
Manual installation of a new G700 with an S8300
486 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Configure Local Survivable Processor Screen
10. Select one of the following options:
- This is NOT a local survivable processor.
- This is a local survivable processor (LSP).
11. If you clicked the LSP option and the primary controller is an S8500 or S8700-series Media
Server, complete the additional fields as follows:
●
In the Registration address at the main server field, enter the IP address of a server’s
NIC connected to a LAN to which the LSP or ESS server is also connected. The IP
address is used by the LSP or ESS server to register with the main server. In a new
installation, where the LSP or the ESS server has not received the initial translation
download from the main server, this address will be the only address that the LSP or the
ESS server can use to register with the main server.
●
File synchronization address of the main cluster: Enter the IP address of a server’s
NIC connected to a LAN to which the LSP or the ESS server is also connected. The ESS
server or the LSP must be able to ping to the address. Consideration should be given to