Avaya S8300 - Manual (Page 267)

Upgrading the S8300A
Issue 9.1 June 2006 267
Configuring network parameters
Note:
Note:
For this procedure, you must have the host name, subnet mask, and IP address
of the S8300, and the IP address of the default gateway.
Because the software upgrade resets the configuration data, you must reconfigure the network
parameters on the S8300 before restoring the backup files. Also, it is possible that the new
software added or changed some of the configuration fields or screens.
To configure network parameters
1. Under Server Configuration click Configure Server to start the configure server process.
2. Click Continue through the Review and Backup Notices to get to the Specify how you
want to use this wizard screen.
Specify how you want to use this wizard screen
3. Select Configure individual services and click Continue.
4. Click Configure Interfaces from the “Configure Individual IP Services” list on the left.
The Configure Ethernet Interfaces screen displays.