Avaya S8300 - Manual (Page 284)

Upgrading an existing S8300A to R3.1 using the Web pages
284 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Note:
Note:
Avaya P330 Stack Processors now support a "Faststart" or "Portfast" function,
because the 802.1w standard defined it. An edge port is a port that goes to a
device that cannot form a network loop.
To set an edge-port, type set port edge admin state module/port
edgeport
.
For more information on the Spanning Tree CLI commands, see the Avaya P330T User’s Guide
(available at
http://www.avaya.com/support ).
Post-upgrade tasks
Complete the following tasks after you have finished the upgrade:
If using IA770:
1. Restore AUDIX data on page 285
2. Saving translations on page 289
3. Installing IA770 service pack (or RFU) files and optional language files, if any on page 289
Complete the upgrade process (S8300 is the primary controller):
4. To check media modules on page 290
5. To enable scheduled maintenance on page 290
6. To busy out trunks on page 291
7. To check for translation corruption on page 291
8. To resolve alarms on page 291
9. To re-enable alarm origination on page 291
10. To back up the system on page 291