Chapter 6, Dures in, Chapter – Avaya S8300 User Manual
Page 293
Issue 9.1 June 2006
293
Chapter 6: Upgrading an existing S8300B to R3.1
using the Upgrade Tool
This section covers the procedures to use the Upgrade Tool to upgrade the following:
●
The software on an installed Avaya S8300B Media Server and its LSPs, from a 2.x or 3.0
release to 3.1.
●
The firmware on an installed Avaya G700 Media Gateway.
!
Important:
Important:
This chapter assumes that the currently installed S8300 is version B running
Communication Manager release 2.1 or greater. If the currently installed S8300 is
version A, follow the upgrade procedures in
Chapter 5: Upgrading an existing
S8300A to R3.1 using the Web pages
. If the S8300 is version B, but is running
release 2.0 of Communication Manager, follow the upgrade procedures in
Chapter 12: Manual upgrade of an existing S8300B and G700 to R3.1
!
Important:
Important:
These procedures assume that you are upgrading an S8300 primary controller
and/or any remote LSPs connected to the primary controller. If you are upgrading
an LSP by itself locally, you cannot use the Upgrade Tool. Instead, you must
follow the procedures in