The need to restore ip phone files, Major tasks to upgrade the s8300b to release 3.1, And upgrade the g700 firmware – Avaya S8300 User Manual
Page 295
Major tasks to upgrade the S8300B to release 3.1 and upgrade the G700 firmware
Issue 9.1 June 2006
295
Note:
Note:
With release 3.0 and later of Communication Manager, the Server CD no longer
has *.tar or *.tar.gz files. These have been replaced with RPM files that use
storage space on the Server CD and the S8300 hard drive more efficiently. To
work with these files, a server with release 2.x of Communication Manager first
requires a pre-upgrade service pack installation.
The need to restore IP Phone files
If, before the upgrade, the existing system was serving as an http or tftp server for 4600-series
IP Phone firmware downloads and configuration updates, the downloadable 4600-series IP
Phone firmware and configuration file are not available on the server after the upgrade.
As a result, you must retrieve the 46xx firmware (the 46xx .tar file, for example
46xxH323_cm2_2_wi1_15_ipt2_2_111405.tar) from the Avaya Downloads Web site and
download the 46xx firmware file to the server after the upgrade. However, you can save a copy
of the 46xx configuration file before the upgrade and copy it back into the /tftpboot directory after
the upgrade.
See the following:
●
Saving a copy of the 4600-series phone configuration file, if any
●
Copying IP Phone firmware to the media server, if necessary
●
Restoring the 4600-series phone configuration file, if any
Major tasks to upgrade the S8300B to release 3.1
and upgrade the G700 firmware
The major tasks to upgrade the S8300B to release 3.1, and upgrade the G700 firmware are:
●
Before going to the customer site
●
On-site Preparation for the Upgrade
The Upgrade Tool performs the following tasks automatically:
-
Run the Upgrade Tool to upgrade the primary controller, LSPs, and G700 media
gateways
●