Avaya S8300 - Manual (Page 386)

Telephones and adjunct systems
386 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Where is the IA770 location and software
IA770 INTUITY AUDIX messaging is a software-only version of INTUITY AUDIX messaging
that uses a QSIG-MWI H.323 virtual trunk for communication between the Communication
Manager and IA770 software. The INTUITY AUDIX system software is loaded directly onto the
S8300 hard drive.
Note:
Note:
For upgrades only, a G700 Media Gateway that previously used a CWY1 board
can continue to use the CWY1 board with IA770 INTUITY AUDIX software.
However, the CWY1 board is no longer available for new systems.
Using an AUDIX trunk group as well as an AUDIX hunt group for
new systems
For new systems, an H.323 virtual trunk integration must be established. The virtual trunk
group, and signaling group, setup is handled automatically when you install IA770 INTUITY
AUDIX Messaging with the Avaya Installation Wizard. Otherwise, you must administer the trunk
group, its signaling group, and the assigned network region and IP codec set with
Communication Manager once the software is installed. The number of trunks assigned to the
trunk group can be either 3, 6, or 12.
The use of trunks replaces the need for voice ports in the hunt group. However, an INTUITY
AUDIX hunt group must still be defined. The hunt group setup is also handled automatically
when you install IA770 INTUITY AUDIX Messaging with the Avaya Installation Wizard.
Otherwise, you must administer the hunt group using Communication Manager. Other switch
administration tasks that are associated with proper hunt group functions, such as creating
COR, COS, and coverage paths, are also required.
IA 770 INTUITY AUDIX installations and S8300
upgrades for IA 770 INTUITY AUDIX
The INTUITY AUDIX software must be installed or upgraded at the same time as the S8300
Communication Manager software load (the .rpm files). The IA770 software is delivered on the
Communication Manager software distribution CD. The Communication Manager installation
tools install IA770 INTUITY AUDIX automatically.
For complete information on IA 770 INTUITY AUDIX Installations Avaya IA770 INTUITY AUDIX
Messaging, Release 3.0, Installation, Upgrades, and Troubleshooting, 11-300532.