Avaya S8300 - Manual (Page 388)

Telephones and adjunct systems
388 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
PROCR administration task summary
(for the S8300 Media Server)
To administer PROCR on the S8300 Media Server with G700 Media Gateway:
1. On the SAT interface, type display system-parameters customer-options.
Go to page 4 and make sure that Processor Ethernet is enabled.
2. Type display ip-interfaces
Make sure the PROCR is administered and its Ethernet port is enabled. If the PROCR is
not listed (PROCR should appear in the Type option field), add the PROCR.
To administer CTI links:
1. Use the display system-parameters customer-options command and make sure
the following option is set to yes:
Co-Res DEFINITY LAN GATEWAY (y)
2. Use the add cti-link command to administer a CTI link.
3. Use the change ip-services command and specify a Service Type of DLG.
When Service Type DLG is entered, the system adds a DLG Administration page as the
last of the form.
4. Complete the DLG Administration page to add your client information.
Note:
Note:
A CTI link must be administered before a link number can be entered. For more
information and detailed procedures, refer to CallVisor® ASAI Technical
Reference, 555-230-220.