Avaya S8300 - Manual (Page 603)

Preparing for the upgrade to R3.1 on-site
Issue 9.1 June 2006 603
To access the SAT
1. From the bash CLI, type SAT and press Enter.
Or, to open SAT directly from your laptop,
a. Click Start > Run.
b. Type telnet 192.11.13.6 5023 and press Enter.
2. Log in as craft or dadmin.
3. Enter w2ktt for the Terminal Type (if you are running Windows 2000 on your laptop).
4. Accept the default (y) for Suppress Alarm Origination.
Checking current software release
Check the release of Communication Manager currently running on the S8300 to determine
whether a pre-upgrade service pack is required.
To check the current software release
1. Log in to the Web interface on the S8300 and launch the Maintenance Web Interface.
2. Choose View Software Version under Server Configuration and Upgrades.
The system displays the View Software Version screen.
Software Version Screen