Enabling ram disk on the media server, Reboot the media server, Verifying the time, date, and time zone – Avaya S8300 User Manual
Page 639
Upgrading the S8300A
Issue 9.1 June 2006
639
Enabling RAM disk on the media server
To enable RAM disk, perform the following steps:
1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP
address of 192.11.13.6.
2. At the command line, type sudo ramdisk -v -f enabled, and press Enter.
Reboot the media server
To reboot the media server, perform the following steps:
1. On the Maintenance Web Interface, under Server select Shutdown Server.
2. Select the Delayed Shutdown option. Also, be sure the Restart server after shutdown
checkbox is selected.
3. Click the Shutdown button.
Click OK to confirm.
Verifying the time, date, and time zone
To verify the time, date, and time zone
1. Under Server click Server Date/Time.
The Server Date/Time screen displays.