Summers Superchisel - 3-Section - Manual (Page 66)

2-54
SECTION 2 – DECALS/OPTIONS
1. Install danger, warning, and caution decals.
– Part numbers can be found on lower right hand corner of each decal. Match this number with
number on decal location drawing on Page 1-6.
– The drawing gives approximate locations of decals. Decals must be clearly visible.
– Order replacement decals if any are damaged.
2. Install reflectors.
– Amber reflectors are part # 8Z0800, these should be placed on front corners and sides of
machine in transport position.
– Red-orange reflectors are part # 8Z0805, these should be placed on outside back of machine
in transport position.
– Red reflectors are part # 8Z0810, these should be placed on outside back of machine in
transport position.
3. Install Safety Light Kit, see Page 6-16 for mounting layout.
OPTIONS
See Parts Section for layout of Optional Mounted Harrows, Caster Wheel and Rear Hitch.