Summers Superchisel - 3-Section - Manual (Page 78)

3-12
SECTION 3 – CHISEL PLOW OPERATION
4. Use a safety chain between tractor drawbar and chisel plow hitch when transporting.
5. Only tow at a safe speed – 20 MPH MAXIMUM. Use caution when making corners or meet-
ing traffic.
6. Follow all local laws governing transporting of farm machinery.
7. Be aware of and comply with all height and width transport requirements. (See specifica-
tions page 5-2).
8. Stay clear of overhead lines.
9. Avoid sharp turns on hard surfaces. Solid mounted lift arms may cause wheel assemblies
to scuff. Damage to tires and machine could occur.
10. Frequently check for traffic from rear, especially during turns.
UNHOOKING CHISEL PLOW FROM TRACTOR
1. Lower machine and relieve hydraulic pressure from cylinders before disconnecting from
tractor.
2. Disconnect hydraulics and Safety Light Kit wiring harness.
3. Rotate jack into standing position and extend jack.
4. Block tires to prevent movement of machine after unhooking.
5. Remove draw pin and safety chain.
8Z0346
TO AVOID INJURY OR DEATH
DO NOT CONTACT
ELECTRICAL LINES.
DANGER