Overview, 1. ut10 tower – Campbell Scientific UT20 and UT30 Tower-based Weather Stations User Manual
Page 17
UT20 and UT30 Tower-based Weather Stations
3
The State Climatologist, (1985) Publication of the American Association of
State Climatologists: Height and Exposure Standards for Sensors on
Automated Weather Stations, v. 9, No. 4 October, 1985.
4
EPA, (1989). Quality Assurance Handbook for Air Pollution Measurement
Systems, EPA Office of Research and Development, Research Triangle Park,
North Carolina 27711.
5. Overview
The UT20/UT30 tower is a versatile mount for sensors, antennas, solar panels,
environmental enclosures, radiation shields, and mounting crossarms. Its 6 m
(20 ft) or 9 m (30 ft) height allows for wind measurements at that height.
The tower consists of 2.5 cm (1 in) OD corrosion-resistant aluminum tubing. It
includes an adjustable mast, a hinged base, anchor bolts, lightning rod,
grounding rod, and cable tie kit.
Enclosures purchased for use with this tower must be ordered with the “-TM”
option. This will provide the necessary bracketing to mount the enclosure to
the tower.
FIGURE 5-1. UT10 tower
7