2 weather station or datalogger support suite, 3 quick start review, Weather station or datalogger support suite – Campbell Scientific UT20 and UT30 Tower-based Weather Stations User Manual
Page 70: Quick start review
UT20 and UT30 Tower-based Weather Stations
10.2 Weather Station or Datalogger Support Suite
Use of VisualWeather, PC400, or LoggerNet enables interfacing with the
weather station through Windows. Follow the installation procedure outlined
in the front of the software manual. These software packages download
programs to the weather station datalogger, monitor data, and retrieve data
stored in the datalogger.
10.3 Quick Start Review
Follow these steps to program the weather station datalogger and install the
support software suite.
1. Install VisualWeather, PC400, or LoggerNet into your computer as
outlined in their respective manuals.
2. Click the VisualWeather, PC400, or LoggerNet icon.
3. Create a program using Short Cut, which is included in VisualWeather,
PC400, and LoggerNet.
4. Print the wiring diagram produced by Short Cut and follow the wiring
assignments when connecting sensors to the weather station datalogger.
5. Use the EZ Setup Wizard in VisualWeather, PC400, or LoggerNet to set
up the weather station.
60