Campbell Scientific UT20 and UT30 Tower-based Weather Stations - Manual (Page 52)

UT20 and UT30 Tower-based Weather Stations
8.5.7 HMP60 Vaisala Temperature and RH Probe
Mount the HMP60 probe inside the 41303-5A 6-Plate Gill Radiation shield as
shown in FIGURE 8-19.
1. Loosen the two mounting clamp screws on the base of the radiation shield.
Insert the HMP60 sensor through the clamp until the base of the sensor is
even with the bottom of the clamp.
Tighten the two screws evenly until the clamp is snug against the sensor base.
FIGURE 8-19. HMP60 Temperature and RH Probe
41303-5A
HMP60
42