3 mounting options, Mounting options – Campbell Scientific UT20 and UT30 Tower-based Weather Stations User Manual
Page 58
UT20 and UT30 Tower-based Weather Stations
FIGURE 8-25. Distance from edge of transducer housing to grill
8.5.13.3 Mounting Options
There are two standard mounting options available for the SR50A sensor.
The first is the SR50A Mounting Kit, pn 19517. This bracket is used to mount
the SR50A to a CM206 crossarm or a pipe with a 1-inch to 1.75-inch OD.
FIGURE 8-26 and FIGURE 8-27 show a couple of angles of the SR50A
mounted to a crossarm. A U-bolt attaches the bracket to the crossarm and two
screws attach the SR50A to the bracket.
Another mounting option shown in FIGURE 8-28 utilizes a mounting stem (pn
19484) and a NU-RAIL. The mounting stem is sized to fit a 1-inch NU-RAIL
(pn 1049). This mounting method was used for the SR50 (predecessor to the
SR50A ) and the stem can be used to fit the SR50A into existing SR50 mounts.
FIGURE 8-26. SR50A mounted to a crossarm via the 19517 Mounting
Kit
48