Campbell Scientific UT20 and UT30 Tower-based Weather Stations - Manual (Page 54)

UT20 and UT30 Tower-based Weather Stations
8.5.9 HMP155A Vaisala Temperature and RH Probe
Mount the probe inside the 41005-5 14-Plate Gill Radiation shield as shown in
FIGURE 8-21.
1. Loosen the split plastic nut on the base of the shield. Insert the probe and
tighten the nut.
FIGURE 8-21. HMP155A Vaisala Temperature and RH Probe
8.5.10 CS100 or CS106 Vaisala Barometric Pressure Sensor
Mount the barometer to the enclosure backplate.
1. Mount the barometer to the mounting plate using the two screws and
grommets provided.
41005-5
HMP155A
44