Alpine VPA-B222 - Manual (Page 17)

15
-EN
01GB05VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
The following explanation is how to set the voice interrupt type of the
speaker input. When the navigation voice guidance is made to interrupt,
set to DEMAND, and the telephone voice is made to interrupt, set to
MUTE, these are recommended.
Setting items: F.SYS MIX TYP
Setting content: FULL / DEMAND / MUTE
• The setting can be made when INT or BOTH is set in "Setting the
Speaker Input Mode" (page 14).
The setting should be made according to the speaker output of the car
system (navigation/telephone).
Setting items: F.SYS INT CH.
Setting content: L / R / BOTH
• Usually set to BOTH.
• The setting can be made when INT or BOTH is set in "Setting the
Speaker Input Mode" (page 14).
• The speaker input interrupt voice is output from the right and left
front speaker regardless of this setting.
Connecting the Navigation
If an Alpine navigation system is connected, make the necessary
settings in “Setting the Navigation/Speaker Input Voice Interruption”
(page 14). Also make the following settings.
When you connect optional navigation equipment, set to ON.
Setting item: NAV.
Setting contents: OFF / ON
With an Alpine navigation system connected to the VPA-B222, the
voice guidance of the navigation system will be mixed with the DVD or
CD playback sound.
You can adjust the volume level of the voice guidance.
Setting item: NAV. MIX LV
Setting contents: 0 to 15
• When NAV. is turned on, the setting can be made. Refer to "Setting
the Navigation Mode" (page 15).
Connecting an External Input Device
(AUX)
If an external input device is connected, make the following settings.
Setting item: AUX IN-1, 2, 3
Setting content: OFF / ON
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• AUX IN-3 is adjustable when the external expansion box (VPE-S431)
is connected.
• OFF is not displayed when a DVD player or DVD changer is
connected with the optional Ai-NET.
• When either DVD player or DVD changer is connected to AUX IN 1,
DVD is displayed on the screen. When both of them are connected,
DVD is displayed for AUX IN 1 and DVD CHANGER is displayed for
AUX IN 2.
When more than one external device is connected, you can name each
(up to 3) as you like.
Setting items: NAME
Setting contents: AUX / VCR / GAME-1,2 / TV / EXTDVD*
• The setting can be made when ON is set in "Setting the AUX Mode"
(page 15).
• The selected source name is displayed instead of AUX source name.
If selecting TV/EXT.DVD as the source, the screen will change to the
function screen of that source.
• Only when an Alpine TV tuner is connected, can you operate the
displayed function guide from this unit.
• If an Ai-NET compatible DVD player/DVD changer is connected,
names are automatically set, however, they cannot be changed.
* “EXT.DVD” is displayed on the source selection screen when a DVD
player is connected, and “DVD-1-3” is displayed on the source
selection screen when the NAME setting is set to “EXTDVD” on
more than one AUX (included when an external Ai-NET compatible
DVD player is connected).
Setting item: LEVEL
Setting content: LOW / HIGH
Setting the Interrupt Type of the Speaker
Input Voice
FULL: Regardless of the speaker interruption detection
level, voice interruption and source sound are both
active. If voice interruption cannot be heard clearly,
adjust the source volume accordingly on the
commander.
DEMAND: When speaker input interruption occurs, voice
interruption may be too high or too low, adjust the
source volume so voice interruption can be heard. If
no speaker input interruption occurs for 5 seconds,
source volume returns to the level you initially set.
When speaker input interruption occurs again,
source volume level automatically returns to the last
one you set.
MUTE: To avoid voice interruption not being heard clearly,
this setting mutes the current source sound
whenever speaker input interruption occurs. In this
setting, even when voice interruption cannot be
heard clearly, you can still set the volume by the
commander. When speaker input interruption occurs,
the commander buttons blink. Press SOURCE/
POWER to cancel voice interruption.
Setting the Channel of the Speaker
Interruption Detection
L: Outputs from the left speaker of the car system.
R: Outputs from the right speaker of the car system.
BOTH: Outputs from both speakers of the car system.
Setting the Navigation Mode
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation cannot be changed from this unit.
Navigation Audio Interruption Volume
Adjustment
Setting the AUX Mode
OFF: AUX source is not displayed.
ON: AUX source is displayed.
Naming External Devices
Adjusting the External Input Audio Level
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
01GB00VPAB222.book Page 15 Friday, January 20, 2006 6:37 PM