Cd/mp3/wma operation (optional), Playing cd/mp3/wma – Alpine VPA-B222 User Manual
Page 19
17
-EN
01GB05VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
Depending on the connected monitor, the display may move out of
position. During touch panel operation, if the position between the
display on the LCD and the display of the touch panel does not match,
adjust the display position.
Setting items: SCREEN ADJ
Setting content:
Adjustment if a monitor not compatible with touch panel
operation is connected.
The screen position within the display is adjustable. The position is
controlled from the commander.
1 In the SCREEN ADJ mode, press the joystick right.
The adjustment screen appears.
2 Press the joystick up, down, left or right to adjust the
display position.
3 Press
/
/ENTER.
The adjustment is complete, and the display returns to
the main source screen.
Adjustment if a touch panel compatible monitor is connected.
The screen and soft button positions are adjustable within the
display. The position is controlled from the soft buttons.
1 Touch [
] of SCREEN ADJ.
2 Touch [
], [
], [
] or [
] to adjust the display position,
and touch [ENT].
The TOUCH LOCATE screen is displayed.
3 Touch the center the
mark displayed in the lower left of
the screen.
The screen changes to the adjustment screen.
4 Touch the center of the
mark displayed in the upper
right of the screen, then touch [ENT].
The adjustment is complete, and the display returns to
the main source screen.
This display can be used only when the optional XM Satellite Radio
Receiver is connected.
Setting item: ADF
Setting content: OFF/ON
Display example for MP3/WMA main screen
Disc number display
Folder number display
File number display
Playing CD/MP3/WMA
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Press the joystick up or down to select the CD/MP3/
WMA mode (CD CHANGER, etc.), then press
/
/
ENTER.
3
Press and hold
or
for at least 2 seconds to
select a disc (when a changer is connected).
4
While playing back MP3/WMA. Press
or
to
select the desired folder.
Adjusting the display position
Setting the Auxiliary Data Field Display
ON:
The Auxiliary Data Field is displayed in the XM mode.
OFF: The Auxiliary Data Field is not displayed.
CD/MP3/WMA
Operation
(Optional)
Joystick
01GB00VPAB222.book Page 17 Friday, January 20, 2006 6:37 PM