Alpine VPA-B222 - Manual (Page 59)

57
-EN
01GB07VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
Connect an expansion box (VPE-S431), DVD Player, DVD Changer or a Touch
Panel-compatible Monitor.
VPA-B222
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place this switch in the EQ/DIV position. When no
device is connected, leave the switch in the NORM position.
• Be sure to turn the power off on the unit before changing the
switch position.
To AV Selector Terminal
AV Selector Cable (Included with VPE-S431)
RCA Extension Cable (Sold separately)
Monitor Control Lead (White/Pink)
Connect this to the Monitor Control Lead of the touch panel-
compatible rear monitor.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Ai-NET Cable (Included with DVD video player)
Ai-NET Cable (Included with DVD changer)
To Ai-NET Connector (Black)
To Ai-NET Connector (Gray)
DVD PLAYER
(DVA-5210, etc.)
(Sold separately)
To AUX Input (AUX IN 1)
Terminals
To AUX Input (AUX IN 2)
Terminals
DVD CHANGER
(Sold separately)
EXPANSION BOX
(VPE-S431)
(Sold separately)
To AUX Output
Terminals
(AUX1) REMOTE IN
(White/Brown)
(AUX1) REMOTE OUT
(White/Brown)
(AUX2) REMOTE IN
(White/Brown)
(AUX2)
REMOTE OUT
M.CONT
(White/Pink)
REMOTE
IN
(White/Brown)
REMOTE OUT
(White/Brown)
TOUCH PANEL COMPATIBLE
REAR MONITOR
(Sold separately)
M.CONT
(White/Pink)
To Video Input
Terminals
To Audio Input
Terminals
• If the expansion box (VPE-S431) is connected to either a DVD video player or DVD changer, connect this to AUX IN 1. If this is
connected to AUX IN 2, remote control operation will not be possible. If both are to be connected, connect the DVD video player to
AUX IN 1, and the DVD changer to AUX IN 2.
(White/Brown)
01GB00VPAB222.book Page 57 Friday, January 20, 2006 6:37 PM