Alpine VPA-B222 - Manual (Page 54)

52
-EN
01GB07VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
Connections (VPA-B222 Wiring Diagram)
• Set the system switch to “NORM” when only a changer is connected (when the Ai-NET compatible equalizer is not used).
To guide control lead of
the external audio
processor
To the instrument
cluster illumination
VPA-B222
(White/Brown)
(Orange)
(White/Green)
(Blue/White)
(Blue)
(Pink/Black)
(Yellow/Blue)
(Yellow)
(Black)
SPEAKER
LEFT
FRONT
(White/
Black)
SPEAKER
LEFT
REAR
(Green)
SPEAKER
RIGHT
REAR
(Violet/
Black)
SPEAKER
RIGHT
FRONT
(Gray)
To amplifier or equalizer
Front left Rear left Rear right Front right
REMOTE OUT (AUX2)
ILLUMINATION
GUIDE CONT
REMOTE
TURN-ON
POWER ANT
AUDIO INTERRUPT IN
PARKING BRAKE
BATTERY
GND
Antenna
(White) (Green/
Black) (Violet) (Gray/
Black)
FOOT BRAKE
(Yellow/Black)
IGNTION
(Red)
To remote input lead
To power antenna
To vehicle phone
To the parking brake
signal lead
To the foot brake cord or
brake lamp cord
Battery
Speakers
Ignition key
To speaker output lead of
the vehicle
To speaker output lead of
the vehicle
To speaker output lead of
the vehicle
To speaker output lead of
the vehicle
To remote input lead
REMOTE OUT (AUX1)
(White/Brown)
SPEAKER INPUT (Gray)
RIGHT
FRONT
LEFT
FRONT
(White/
Red)
SPEAKER INPUT (White)
(Gray/
Red)
01GB00VPAB222.book Page 52 Friday, January 20, 2006 6:37 PM