Alpine VPA-B222 - Manual (Page 22)

20
-EN
01GB05VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
To watch a video source, your vehicle must be parked with the ignition
key in the ACC or ON position. To do this, follow the procedure below.
1 Push the foot brake to bring your vehicle to a complete
stop at a safe location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 While the parking brake is being engaged the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD mode, as
long as the car's ignition has not been turned off. It is not necessary to
repeat the above procedure (1 through 3), of “To display the DVD mode
screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
• If you try to activate the auxiliary device while driving, the display
will show the warning-PICTURE OFF FOR YOUR SAFETY.
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Press the joystick up or down to select the DVD
mode (EXT.DVD or DVD CHANGER, etc.), then press
/ /ENTER.
Playback starts.
On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. The DVD menu can be controlled by the
commander supplied with the unit. If this happens, perform the
operation described below to start playback.
Press the joystick up, down, left or right to select an
item, then press and hold
/ /ENTER for at least
2 seconds.
• Press MUTE/RTN/SETUP to return to the previous screen.
• The Video CD menu screen cannot be controlled from the
commander supplied with the unit.
• Depending on the disc, the menu screen may be recalled from the
FUNCTION screen. Select MENU on the FUNCTION screen and
press
/ /ENTER to recall the menu, after displaying the
FUNCTION screen by pressing and holding /MENU/FUNC. for
at least 2 seconds.
Playing Still Frames (Pausing)
1
During playback, press / /ENTER.
2
Press / /ENTER to resume playback.
Finding the Beginnings of Chapters or
Tracks
During playback, press or .
The chapter/track switches each time the button is pressed, and
playback of the selected chapter/track starts.
• Some DVDs do not have chapters.
Fast-forwarding/Fast-reversing
1
During playback, press and hold (fast-reverse)
or (fast-forward).
2
Release or to return to normal playback.
To display the DVD mode screen
Caution
• Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
• If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
If a menu screen appears
: Press this to start playback from the beginning of the
following chapter or track.
: Press this to start playback from the beginning of the
current chapter or track.
Supplementary explanation
“Chapters” are divisions of movies or musical selections on
DVDs.
“Tracks” are divisions of movies or musical selections on
video and music CDs.
01GB00VPAB222.book Page 20 Friday, January 20, 2006 6:37 PM