Printer status indications – AGFA TM 14ADV User Manual
Page 136
User’s Manual
6-17
SOLVING
PROBLEMS
Printer statuses refer to conditions which generally require no action
by you. The following table lists the printer statuses and explains
their meaning. It does not include messages in menu mode.
Message
Meaning
FORM FEED
The printer displays this message when
you press
with the DATA
indicator off. The printer is printing data
remaining in buffer.
<<<INITIALIZE>>>
The printer is initializing. This message
appears whenever you turn on the
printer, close the upper door, or lock the
paper guide.
MENU RESET
The printer displays this message when
you press
for five or more
seconds. This reset returns parameter
settings in the menu to their factory
defaults except for interface settings as
well as clears error latches, buffered data,
and temporary soft fonts.
PRINT FONT
The printer displays this message when
you press
for five or more
seconds. The printer is printing the font
report.
READY
The printer is ready to print.
RESET
The printer displays this message when
you press
for five or more
seconds. This reset clears error latches,
buffered data, and temporary soft fonts.
SELF TEST
The printer displays this message when
you press
for five or more
seconds. The printer is printing the
status report.
WARMING UP
The printer is warming up to its
operating temperature.
Printer Status Indications
Printer Status
Indications
08 Chapter 6
07.08.1997, 11:41 Uhr
17