AGFA TM 14ADV - Manual (Page 34)

User’s Manual 1-19
GETTING
STARTED
POWER ONLINE DATA ERROR
MFF
PAPER SIZE
PRINT
FONT
SELF
TEST
RESET
CONT. ENTER –
+ MENU READY
FORM
FEED
RESET
MENU
TRAY
SELECT
Connecting the Printer to Your Computer
Printing a Test Page Offline
The printer has a status report function which prints a page
summarizing printer option settings and showing samples of resident
fonts. Use this function to check the printer performance offline.
1. Turn the printer on. The
printer initializes the
mechanism and then enters
the ready state. The message
display indicates
<<<INITIALIZE>>> ,
WARMING UP, then READY .
2. Print a test page offline.
Press the button to
put the printer offline (the
ONLINE indicator turns
off). Press the
button for more than five
seconds. The message
display indicates
SELF
TEST and the DATA
indicator flashes. A status
report page is printed.
Check that the printing is
successful.
Notice:
The status report is for either the PCL emulation or the FPS emulation
depending on the emulation you used for printing the last document;
however, the status report is for the FPS emulation if it is printed
immediately after the printer is turned on. To clearly select the report,
use the test menu in setup mode.
READY
☞
04 Chapter 1 07.08.1997, 11:39 Uhr 19