AGFA TM 14ADV - Manual (Page 25)

1-10 User’s Manual
Setting Up
Installing the Cleaner and Cleaner Pad
This printer is shipped without installing the cleaner and cleaner pad
which removes dirt from the pressure roller in the fuser unit. Be sure
install the cleaner and cleaner pad before printing.
To install the cleaner and cleaner pad, follow these steps:
1. Mount the cleaner pad on
the cleaner. Put the cleaner
pad on the cleaner and slide
the cleaner pad into the
locked position.
2. Open the cover. Push the
engraved portion on the
stacker to unlock the cover.
04 Chapter 1 07.08.1997, 11:39 Uhr 10