Sony PCG-GRX690P - Manual (Page 139)

Using Computer Monitors and Projectors
139
6 Select a display.
❑ Press the Fn+F8 key combination to select either the computer screen
(LCD) or an external display. See “Selecting a display mode” for more
information.
Connecting a projector
You can use a projector to display the actions and images on the computer screen
(LCD).
To connect a projector
1 Plug the projector into an AC outlet.
2 Turn off the computer.
3 Plug the display cable into the Monitor (VGA) port on the computer.
4 Plug the other end of the display cable into the projector.
5 Plug the audio cable into the Headphone jack on the computer.
6 Plug the other end of the audio cable into the projector.
7 Turn on the projector (if it is not already on), and then turn on the computer.
8 Press the Fn+F7 key combination to toggle the display between your
computer and the projector. See “Selecting a display mode” for more
information.
The Fn+F8 key combination will not work once a DVD is inserted into the
optical drive. Switching the display while a DVD is playing may cause the
computer to malfunction, and you may need to restart the DVD software.