Sony PCG-GRX690P - Manual (Page 165)

DVgate Program Notes
165
DVgate Program Notes
❑ Recording images to a digital video device
❑ Adjusting image resolution
❑ Saving to your hard disk drive
Recording images to a digital video device
If your system displays the message, “Failed to record to DV deck, please check
deck’s power status, cable connection…,” while you are recording images to a
digital video device using the DVgate program, close all open programs, and
restart your computer. Frequent recording of images to a digital video device
while using DVgate may cause this situation to occur.
For more information on the DVgate program, see the DVgate online help.
Adjusting image resolution
If the images on the computer screen (LCD) do not display smoothly, the
resolution may not be set correctly.
To check the resolution
1 From the DVgate Motion-Monitor window, click Setup.
2 From the shortcut menu, point to Settings, and then select Low Resolution.
The settings you change in this menu affect the images in the monitor
window only. Movie data imported to your hard drive and images recorded
to DV devices will not be affected.
Saving to your hard disk drive
In order to improve the performance of your computer’s DVgate™ motion
software, the hard disk on your computer has been formatted with two partitions,
C and D. The C partition holds 40 percent and the D partition holds 60 percent of
the entire drive capacity. The DVgate program saves files to the D partition. This
prevents large video captures from consuming the available space on your C
partition. To maintain optimum performance of the DVgate program, you should
defragment or format the D partition regularly.