Sony PCG-GRX690P - Manual (Page 16)

VAIO Computer Quick Start
16
2 Slide the battery into the battery bay. If the computer is on, it automatically
detects the battery.
3 Push the battery bay cover up until it clicks into place.
Some software programs and peripheral devices prevent the system from
activating Hibernate mode when the battery is low or the computer is running on
AC power. To avoid loss of data when using battery power, you should save your
data frequently and manually activate a power management mode, such as
Standby or Hibernate. See “Using power saving modes” for more information.
Removing a battery
If you are not using the computer for an extended period of time, remove the
battery from the computer to avoid damaging the battery. You can remove the
battery when the computer is on or off.
To remove a battery
1 Push the battery bay cover down to open it.
2 Pull the battery out of the battery bay.
Inserting a Battery
✍
If the port replicator is attached to your computer, do not insert or remove the battery.
Lifting and turning the computer with the port replicator attached could cause a
temporary loss of power.
If the computer is on, connect the AC adapter and exit a power saving mode
before you remove the battery.
Battery (supplied)
VAIO logo facing up