ATEN CL-1208 - Manual (Page 29)

Port Selection
The CL-1208 / CL-1216 provides three port selection methods to access the
computers on the installation: Manual; OSD (On Screen Display) menus,
and Hotkey. OSD Operation is discussed in the next chapter; Hotkey Port
Selection is discussed detail in Chapter 5.
Manual Port Switching
M
Press a switch to bring the KVM focus to the computer attached to its
corresponding port.
M
Press buttons 1 & 2 simultaneously for two seconds to perform a
keyboard and mouse reset.
M
Press buttons 7 & 8 (CL-1208) or 15 & 16 (CL-1216) simultaneously for
two seconds to invoke Auto Scan Mode (see p. 43).
2005-04-26
Basic Operation
21