Hotkey beeper control – ATEN CL-1208 User Manual
Page 54
Advertising
Hotkey Beeper Control
The Beeper can be Hotkey toggled On and Off (see Activate Beeper, p. 33).
To toggle the Beeper, key in the following Hotkey combination:
1. Invoke HKM (see p. 41).
2. Press [B]
After you press B, the Beeper toggles On or Off. The Command Line displays
Beeper On or Beeper Off for one second; then the message disappears and you
automatically exit HKM.
2005-04-26
CL-1208 / CL-1216 User Manual
46
Advertising
This manual is related to the following products: