ATEN CL-1208 - Manual (Page 41)

(F4 ADM: continued)
Setting Function
EDIT PORT
NAMES To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
Administrator to create, modify, or delete port names. To Edit a
port name:
1. Click the port you want, or use the Navigation Keys to move
the highlight bar to it, then press [Enter].
2. Key in the new Port Name, or modify/delete the old one. The
maximum number of characters allowed for the Port Name is
12. Legal characters include:
w Alpha characters: A - Z
w All numeric characters: 0 - 9
w + - / : . and Space
Case does not matter; the OSD displays the Port Name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc].
RESTORE
DEFAULT
VALUES This function is used to undo all changes and return the setup to
the original factory default settings (see FACTORY DEFAULT
SETTINGS, p. 58) - except for the Names settings that were
assigned to the Ports, which are saved.
CLEAR THE
NAME LIST This function is similar to Restore Default Values. The difference
is that it also clears the Names settings along with undoing all
changes and returning the setup to the original factory default
settings.
ACTIVATE
BEEPER Choices are Y (for Yes), or N (for No). When activated, the beeper
sounds whenever a Port is changed; when activating the Auto
Scan function (see F7 SCAN, p. 38); or an invalid entry is made
on an OSD menu. The default is Y (activated).
(Table continues on next page)
2005-04-26
OSD Operation
33