ATEN CL-1208 - Manual (Page 36)

OSD Functions
OSD functions are used to configure and control the OSD. For example, you
can: rapidly switch to any port; scan selected ports only; limit the list you
wish to view; designate a port as a Quick View Port; create or edit a port
name; or make OSD setting adjustments.
To access an OSD function:
1. Either Click a Function Key field at the top of the Main Screen, or press a
Function Key on the keyboard.
2. In the Submenus that appear make your choice either by Double Clicking
it, or moving the Highlight Bar to it, then pressing [Enter].
3. Press [Esc] to return to the previous menu level.
F1 GOTO:
GOTO allows you to switch directly to a port either by keying in the port’s
Name, or its Port ID.
w
To use the Name method, key in 1; key in the port’s Name; then press
[Enter].
w
To use the Port ID method, key in 2; key in the Port ID; then press
[Enter].
Note: You can key in a partial Name or Port ID. In that case, the screen will
show all the computers that the User has View rights to (see SET
ACCESSIBLE PORTS, p. 34), that match the Name or Port ID pattern,
regardless of the current List settings (see F2 LIST, p. 29, for details).
To return to the OSD Main Screen without making a choice, press [Esc].
2005-04-26
CL-1208 / CL-1216 User Manual
28