Sony DHC-MD595 - Manual (Page 16)

16
Programming CD tracks
— Program Play
You can make a program of up to 25 steps in the
order you want them to be played. You can also
make a Synchro Recording of the program on the
MD (see page 25).
2
1
6
3
3
4
1
Press FUNCTION repeatedly to switch
the function to CD.
2
Press PLAY MODE repeatedly until
“PROGRAM” appears in stop mode.
3
Press . or > repeatedly until the
desired track appears in the display.
4
Press ENTER/YES.
The track is programmed.
“Step” appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track
appears, followed by the total playing time of
the program. If you have made a mistake,
you can clear the last programmed track from
the program by pressing CLEAR.
Total playing
time Last programmed
track number
Selected track number
Playing time of
the selected track
5
To program additional tracks, repeat
steps 3 and 4.
6
Press CD N.
All the tracks play in the order you selected.