Sony DHC-MD595 - Manual (Page 48)

48
2
Press – or + repeatedly until “Undo?”
appears.
“Undo?” does not appear, when there is no
editing function that can be canceled.
3
Press ENTER/YES.
One of the following messages appears,
depending on the last edit.
Editing done Message
Labeling a track or an
MD
Copying a disc or
track title
Erasing labeled
titles
Erasing a single
track
“Erase Undo?” Erasing all tracks
Erasing a portion
of a track
Moving a track “Move Undo?”
Dividing a track “Divide Undo?”
Combining tracks “Combine Undo?”
4
Press ENTER/YES again.
“Complete!” appears for a few seconds and
the contents of the MD are restored to the
condition before the edit.
To cancel Undo function
Press MENU/NO.
Undoing the last edit
— Undo Function
You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo an edit if you
do any of the following after the edit:
• Do another edit.
• Start recording.
• Update the TOC by turning off the system or
ejecting the MD.
• Disconnect the power cord.
You cannot undo the S.F Edit Function even if
you use the Undo Function.
3,4
2 2
1
1
Press MENU/NO in stop mode to
display “Edit Menu”.
“Name Undo?”