Sony DHC-MD595 - Manual (Page 45)

The MD Deck
—
Editing
45
Dividing recorded tracks
— Divide Function
You can use this function to mark track numbers
after recording. The total number of tracks
increases by one and all the tracks following the
divided ones are renumbered.
E.g.: Dividing track 2 into two tracks.
1 2 3
1 2 3 4
2
3,4,5
1
3,4,5
3,4,6
m M
Track
number
Original
tracks
After
DIVIDE
Divide track 2 into
track B and C
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO to display “Edit
Menu”.
3
Press – or + repeatedly until “Divide?”
appears, then press ENTER/YES.
4
Press . or > repeatedly until the
desired track number to divide appears,
then press ENTER/YES.
“—Rehearsal—” appears and the portion to
be divided is played repeatedly.
5
While monitoring the sound, press .
or > repeatedly to adjust the point to
be divided.
You can shift the point by 1-frame* intervals
(1 frame = 1/86 second).
To shift the point by second or minute
intervals, press m or M so that second or
minute flashes, then press . or >.
* You can shift the point by 2-frame intervals
(tracks recorded in Monaural or LP2 Stereo
mode) or by 4-frame intervals (tracks
recorded in LP4 Stereo mode).
6
Press ENTER/YES.
“Complete!” appears for a few seconds and
the newly created track starts playing.
To cancel dividing
Press MENU/NO.
continued
A B C D
A B C D