Sony DHC-MD595 - Manual (Page 47)

The MD Deck
—
Editing
47
1
Press FUNCTION repeatedly to switch
the function to MD.
2
Press MENU/NO to display “Edit
Menu”.
3
Press – or + repeatedly until
“Combine?” appears, then press
ENTER/YES.
4
Press . or > repeatedly until the
first track number of the two to be
combined appears, then press ENTER/
YES.
For example, to combine tracks 4 and 5,
select 4.
First track number
5
Press . or > repeatedly until the
second track number of the two to be
combined appears.
Second track
number to be
combined
New track
number
6
Press ENTER/YES.
“Complete!” appears for a few seconds and
the tracks are combined. Play starts.
To cancel combining
Press MENU/NO.
To return to the condition before
COMBINE
You can return to the original condition
immediately after combining the tracks (see the
next page). You can also return to the original
condition by using the Divide function.
Notes
• Tracks recorded in different recording modes
(stereo, LP2, LP4 or MONO) cannot be combined.
• If both of the combined tracks have track titles, the
title of the second track is erased.
• If “Impossible” appears, the tracks cannot be
combined. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.