Sony PCG-SR33K - Manual (Page 168)

Removing a Memory Module
1. Turn off the notebook and all peripheral devices.
2. Disconnect the power cord and all cables from the notebook, and remove the batteries.
The interior of the notebook becomes extremely hot during operation. Wait at least 1 hour for the
notebook to cool down before you remove the screws.
3. Use a precision Phillips-head screwdriver that matches the size of the screw heads to remove the 6 screws
marked with an * on the bottom of the notebook.
Location of Screws
4. Open the display panel, and gently raise the palm rest toward you, turn it over, and then set it on the
keyboard. Handle the palm rest gently to avoid breaking the attached cable.
Opening the Display Panel
5. Touch a metal object (such as the connector panel on the back of your notebook) to discharge static
electricity, then remove the memory module, pulling it out in the direction of the arrows.
Removing a Memory Module
6. Return the palm rest to its original position by aligning it with the notch on the keyboard and then setting it
on the keyboard. Remember, to handle the palm rest gently to avoid breaking the attached cable.
7. Close the display panel and replace the six screws on the bottom of the notebook with a precision
Phillips-head screwdriver.
Page 168