Notes on cd media, Using the optical drive – Sony PCG-SR33K User Manual

Page 31

Advertising
background image

Using the Optical Drive

It is recommended that you use a Sony compatible DVD drive, for optimal performance.

If you connect a non-Sony DVD driv e to your VAIO notebook, the DVD playback may not function properly. The

bundled DVD software must be installed to play a DVD.

If you use the supplied optical drive when your notebook is running on battery power, the battery life will be shorter.
The drive draws power from the notebook through a PC Card.

Procedures for connecting the optical drive may vary, depending on the optical drive. See the manual that

came with your optical drive for more information on its use.

To play an audio CD

Before you play a CD, check that your notebook settings are correct.

1.

Click Start on the Windows

®

taskbar, point to Settings, and then click Control Panel.

2.

Double-click the System icon.

3.

Click the Hardware tab and then click Device Manager.

4.

Double-click the drive you use under CD-ROM drive.

5.

Click the Property tab and make sure the "Enable digital CD audio for this CD-ROM device" box is checked.

To connect the optical drive

You can connect the optical drive while the notebook is on, however, turn off your notebook before using the

System Recovery CDs.

1.

Remove the PC Card slot protector from the PC Card slot. See

Using PC Cards

for details.

2.

Remove the PC Card from the bottom side of the optical drive.

Removing the PC Card

3.

Insert the PC Card into the PC Card slot with the SONY logo facing up. See

Using PC Cards

for more

information.

Inserting the PC Card

A protective cover is attached to the lens of the CD-ROM drive at the factory. Before using the CD-ROM drive,

remove this protective cover.

Page 31

Advertising