Sony PCG-SR33K - Manual (Page 169)

Installing a Memory Module
1. Perform steps 1 through 4 in Removing a Memory Module .
To av oid damaging the notebook, do not remov e or loosen any other screws.
2. Touch a metal part of the notebook (such as the connector panel on the back of your notebook) to discharge
any static electricity accumulated on your body, then remove the module from its protective package.
3. Install the memory module by holding the module edge connector pointing down with the notch on the right,
and then insert it diagonally into the empty slot.
A Memory Module
4. Lower the memory module until it clicks into place on both ends.
Installing a Memory Module
Do not touch any part of the motherboard or the other components inside the notebook.
5. Return the palm rest to its original position by aligning it with the notch on the keyboard and then setting it
on the keyboard. Remember to handle the palm rest gently to avoid breaking the attached cable.
Aligning the Palm Rest
6. Close the display panel and replace the six screws on the bottom of the notebook with a precision
Phillips-head screwdriver.
Page 169