Agilent Technologies EN 61000-3-2 - Manual (Page 86)

C - Command Summary
86
FORMat:BORDer
This command sets the byte order of IEEE floating point values returned within Arbitrary Block
Response Data. When NORMal is selected, the first byte sent is the sign bit and seven most significant
bits of the exponent, and the last byte sent is the least significant byte of the mantissa. This ordering is
most useful for big-endian controllers such as those that use Motorola processors.
When SWAPped is selected, the least significant byte of the mantissa is sent first and the sign bit and
seven most significant bits of the exponent are sent last. This ordering is most useful for little-endian
controllers such as those that use Intel processors.
Command Syntax FORMat:BORDer <CRD>
Parameters NORMal | SWAPped
*RST Value NORMal
Examples FORM:BORD SWAP
Query Syntax FORMat:BORDer?
Returned Parameters <CRD>
Related Commands FORM[:DATA] MEAS:ARR:CURR:DC?
MEAS:ARR:VOLT:DC? MEAS:ARR:CURR:HARM[:AMPL]?
MEAS:ARR:VOLT:FLUC:ALL?
MEAS:ARR:VOLT:FLUC:FLICker?
MEAS:ARR:VOLT:FLUC:PST?