Arizona Hydrogen Sulfide Analyzer Jerome 631-X - Manual (Page 38)

JCI Kit Contents
• One disk containing the Jerome Communication Software
• Jerome Communication Interface Cable, AZI P/N 6000 1055
• Cable Adaptor, SR-232, 9M/25F, AZI P/N 6000 1045
• User’s manual
System Requirements
• Instrument: Jerome 631-X with the communications option. These Jerome instruments
have a DB-25 connector and related internal hardware and firmware.
• Computer: IBM (or compatible) PC, XT, AT, 286, 386, 486 or Pentium
• Operating System: MSDOS or PCDOS 2.1 or higher
• Video: CGA, EGA or Hercules-compatible monochrome (VGA operates as EGA). Install
MSHERC.COM (provided) before using Hercules monochrome.
• Memory: 512 K bytes or larger
• Interface: Serial interface card
• Printer: IBM, Epson or HP LaserJet Series II graphics compatible
The software can run from the program disk or from the computer’s hard drive. Before using the
software, familiarization with the Jerome Hydrogen Sulfide Analyzer and user’s manual is
recommended.
Data Logger Option
The software can also program the Jerome Data Logger (AZI P/N 6100 0010) used with the
Jerome analyzer. The computer programs the data logger that then attaches to the DB-25
connector on the rear of the instrument. The data logger initiates automatic sampling, triggers
alarms and stores data. This optional accessory enables portable automatic sampling without a
dedicated computer.
Page 38 of 50 AZI Customer Service 800-528-7411 or 602-470-1414