Arizona Hydrogen Sulfide Analyzer Jerome 631-X - Manual (Page 4)

1. FOR THOSE WHO CAN'T READ THE WHOLE MANUAL NOW
This manual contains details that will optimize the results and the life of your instrument. Read
and refer to the manual for complete details on operation, maintenance and troubleshooting,
special voltage inputs and data output.
The Jerome 631-X is easy to operate and ready for use upon receipt from the factory.
• Remove the instrument from the packing material.
Retain all packaging materials for any future shipment of the
instrument.
If the instrument is returned to AZI for any reason, it must be
placed in the original packaging materials that have been tested and
proven to be effective protection during shipment.
• Call AZI Customer Service at 800-528-7411 or 602-470-1414 for Return Material
Authorization (RMA) information prior to returning a unit.
• For all shipments, boxes and packing materials are available from AZI.
• Pack the Jerome instrument only in a Jerome shipping container.
AZI WILL NOT BE RESPONSIBLE FOR SHIPPING DAMAGE.
IF YOU RETURN THE INSTRUMENT IMPROPERLY PACKAGED OR
SHIPPED,
YOU SHOULD INSURE IT FOR FULL VALUE.
• Check for any damage and confirm receipt of all parts on
your packing list. Contact Arizona Instrument Customer
Service at (800) 528-7411 or (602) 470-1414 if you have
any questions.
• Press the ON button. The display should read 000 in less
than one second.
A LO BAT message appears briefly in the upper left
corner.
If the LO BAT light persists, recharge the battery.
See page 17.
Page 4 of 50 AZI Customer Service 800-528-7411 or 602-470-1414