Acer Altos R500 - Manual (Page 115)

105
To install Microsoft Windows NT V4.0 Server or Windows 2000 Server/
Advanced Server Agent :
1 Insert the Management CD into your system’s CD-ROM drive.
2 Click the Applications button.
3 In the Applications list, select "Advanced System Manager
(ASM) Pro Agent V4.50".
4 Click the Setup button.
5 Follow the onscreen installation steps to complete the installation.
6 Verify the path (where the ASM Pro Agent will be installed to) and
click OK. The Welcome screen appears.
7 Click Next. You are asked to stop SNMP service.
8 Click Yes. You are prompted to choose a destination directory. If
you only want to install ASM Pro SNMP agent and Remote
Console, you can choose Typical. If you want to choose more
components, click Custom. There are five components in the ASM
Pro agent:
• SNMP agent
• DMI
ASM Pro agent defines a proprietary ASM Pro.MIF that
supports the same items as the SNMP agent.
• Server Mif
The server.mif that is defined by DMTF will be installed.
• Remote Console
The Remote Console Server is installed which can be remote
control by Remote Console Client
• MMC
This component is only supported on Windows 2000 and is
integrated with the Microsoft Mangement Console.
9 Click Next for the default directory, or click Browse to define your
own destination directory. Check any components you want to
install, and click OK.
The asmcfg utility launches automatically.
You may skip steps 7 through 11 if you are installing ASM Pro
Server Agent solely for the purpose of utilizing UPS and/or RDM
functions.
aa r500.book Page 105 Thursday, September 20, 2001 11:06 AM