Hot-swapping a scsi sca hard disk drive – Acer Altos R500 User Manual
Page 57
Advertising
47
Hot-swapping a SCSI SCA hard disk
drive
You can hot-swap (remove and replace) a SCSI hard disk drive any time
when it fails to operate (indicated by a red LED).
Warning!
NEVER attempt to remove a hard disk drive
when it is active. Doing so may result to data loss, system
crash and damage to both the hard disk drive and to the
server system.
Follow these steps to install a hot-swappable SCSI hard disk:
1
Unlock the drive tray with a hex key.
2
Press your finger to the drive tray to release it. Gently pull it out
from the hot-swap cage.
aa r500.book Page 47 Thursday, September 20, 2001 11:06 AM
Advertising