Acer Altos R500 - Manual (Page 73)

63
Total Memory Total amount of onboard memory. The memory
size is automatically detected by BIOS during the
POST. If you install additional memory, the system
automatically adjusts this parameter to display the
new memory size.
1st Bank
2nd Bank
3rd Bank
4th Bank
Type and size of DIMM installed in DIMM sockets 1,
2, 3 and, 4 respectively. The None setting indicates
that there is no DIMM installed.
Serial Port Serial port address and IRQ setting
PS/2 Mouse Pointing device installation setting. Displays None
if no pointing device is installed.
Parameter Description
aa r500.book Page 63 Thursday, September 20, 2001 11:06 AM