Acer Altos R500 - Manual (Page 99)

89
PnP/PCI Options
PnP/PCI Options allows you to specify the settings for your PCI
devices. Selecting this option displays the following screen:
Parameter Description Option
PCI IRQ
Setting Select Auto to let BIOS automatically con-
figure the plug-and-play (PnP) devices
installed on your system; Otherwise, select
Manual.
Note: Refer to the documentation that
came with your PCI card for more technical
information.
Auto
Manual
PCI Slot 1
PCI Slot 2
When you set the PCI IRQ Setting parame-
ter to Auto, these parameters specify the
auto-assigned interrupt for each of the PCI
devices.
When you set the PCI IRQ Setting parame-
ter to Manual, you need to specify the
interrupt that you want to assign for each
PCI device installed in your system. User input
aa r500.book Page 89 Thursday, September 20, 2001 11:06 AM