Acer Altos R500 - Manual (Page 85)

75
Silent Boot Enables or disables the Silent Boot func-
tion. When set to Enabled, BIOS is in
graphical mode and displays only an iden-
tification logo during POST and while
booting. After booting the screen displays
the operating system prompt (such as DOS)
or logo (such as Windows 95). If any error
occurs while booting, the system automati-
cally switches to text mode.
Even if your setting is Enabled, you may
also switch to text mode while booting by
pressing the Delete key when you see the
"Press DELETE key to enter setup" message
on the screen.
When set to Disabled, BIOS is in the con-
ventional text mode where you see the sys-
tem initialization details on the screen
Enabled
Disabled
Num Lock
After Boot Allows you to activate the Num Lock func-
tion upon booting Enabled
Disabled
Memory Test When set to Enabled, this parameter
allows the system to perform a RAM test
during the POST routine. When set to Dis-
abled, the system detects only the memory
size and bypasses the test routine. Enabled
Disabled
Release All
Blocked
Memory When set to Enabled, this parameter
allows the system to bypass testing the
defective memory banks detected earlier Disabled
Enabled
Configuration
Table Displays preboot system configuration
table when enabled Enabled
Disabled
POST Error
Stop When enabled, if the POST finds an error,
it will stop and the user has to press F1 to
continue. If disabled, even when the POST
finds an error, it will not stop Enabled
Disabled
Parameter Description Option
aa r500.book Page 75 Thursday, September 20, 2001 11:06 AM