Pulsafeeder Eclipse Model 75 - Manual (Page 43)

37
12. If it was removed, install the motor adaptor plate (item 18) onto the motor face using the four bolts and
washers (items 29 and 30). Always tighten fasteners in a progressive “crisscross” pattern.
NOTE: E125 May use (2) Adaptor Plates, ref #18.
Figure 45
13. Secure the magnet hub (item 25) to the drive magnet (item 24) using the four screws (item 27). Always
tighten fasteners in a progressive “crisscross” pattern.
Figure 46