Pulsafeeder Eclipse Model 75 - Manual (Page 50)

44
11.5 Eclipse Standard/Eclipse Hypo 75 General Specifications
Port Size and Type 1.5 inch ANSI 150# / DIN 32/40 Flanged
Direction of Rotation Bi-directional
Theoretical Displacement 1.423 US gal / 100 rev. (53.9 cc / rev.)
Maximum Differential Pressure 150 psig (10 bar, 1034 kPa)
Maximum Allowable Working Pressure 200 psi (13.8 bar, 1379 kPa)
Maximum Speed 1750 rpm
Maximum Capacity at 0 psig 20 US gpm (75 LPM, 4.5 m 3 /hr)
Maximum Viscosity 10,000 cps
Maximum Process Fluid Temperature 150 F (66 C) at maximum 125 psi differential pressure
Minimum Process Fluid Temperature -40 F (-40 C)
Fluid pH Range 0-14
Gear Type Compact Spur Gear Design
Bearing Type Sleeve Bearing Integral Wear Plate
Magnetic Torque Rating 668 in-lbs. (75.4 N-m)
Motor Frame Sizes - NEMA 143/145TC and 182/184TC
Motor Frame Sizes - IEC 100/112 B14 Face
Pump Housing Materials of Construction Standard: Carbon Reinforced ETFE / Hypo: Kynar
Gear Materials of Construction Modified PTFE
Can Materials of Construction Standard: Carbon Reinforced ETFE / Hypo: Kynar
Inner Magnet Materials of Construction Neodymium Iron
O-ring Seal Materials FKM “A”
Approximate Weight 43.7 lbs. (19.8 kg) less motor
11.6 Eclipse Standard/Eclipse Hypo 125 General Specifications
Port Size and Type 1.5 inch ANSI 150# / DIN 32/40 Flanged
Direction of Rotation Bi-directional
Theoretical Displacement 2.135 US gal / 100 rev. (80.82 cc / rev.)
Maximum Differential Pressure Carbon Bearing 80 psig (5.5 bar, 552 kPa)
Maximum Differential Pressure SiC Bearing 100 psig (6.8 bar, 689 kPa)
Maximum Allowable Working Pressure Carbon Brg
and SiC Brg
200 psi (13.8 bar, 1379 kPa)
Maximum Speed 1750 rpm
Maximum Capacity at 0 psig 33 US gpm (12.1 LPM)
Maximum Viscosity 10,000cps
Maximum Process Fluid Temperature 150 F (66 C) at maximum differential pressure
Minimum Process Fluid Temperature -40 F (-40 C)
Fluid pH Range 0-14
Gear Type Compact Spur Gear Design
Bearing Type Sleeve Bearing Integral Wear Plate
Magnetic Torque Rating 668 in-lbs. (75.4 N-m)
Motor Frame Sizes - NEMA 143/145TC, 182/184TC, 213/215TC, 254/256TC
Motor Frame Sizes - IEC 100/112 B14 Face, 132 B14 Face
Pump Housing Materials of Construction Standard: Carbon Reinforced ETFE / Hypo: Kynar
Gear Materials of Construction Modified PTFE
Can Materials of Construction Standard: Carbon Reinforced ETFE / Hypo: Kynar
Magnet Materials of Construction Neodymium Iron
O-ring Seal Materials FKM “A”, EPDM, FEP
Approximate Weight Approx. 44.7 lbs. (20.3 kg)