Figure 1-4. multishelf tao network screen, Figure 1-5. multishelf tao main menu screen, Figure – ADC EMU-830 User Manual

Page 15: Each

Advertising
background image

September 25, 2006

Chapter 1: Overview

LTPE-UM-3159-02

1-5

Figure 1-4. Multishelf TAO Network Screen

Figure 1-5. Multishelf TAO Main Menu Screen

A multishelf network is created by connecting the local area network (LAN) to the 10BASE-T Ethernet connector
available on a shelf. Each shelf must have an EMU-830 management unit installed. A VT100 terminal (or PC) is
connected either locally or remotely (through modems), or through Telnet access to the console port of one EMU in
the network. The shelf containing this EMU is called the local shelf. The local shelf coordinates communication with
all other shelves in the network, which are called the remote shelves.

It is not necessary for you to explicitly identify each shelf in the network, as the local shelf automatically discovers
them. You must, however, pre-configure the EMU in each shelf with a unique IP address and subnet mask to place
all the shelves on the same subnet.

Note:

Shelf networks cannot be connected through a router because the local shelf uses UDP-broadcast

messages as a mechanism to automatically discover other shelves in the network, and routers generally
filter these broadcasts. For connecting multiple devices, use an Ethernet hub or switch instead.

Advertising